background image

Tips

Consider using an existing satellite or cable coax connection. At the point 
where cables enter your home (the grounding box), the antenna can be 
hooked up to an existing coax connection. From the grounding box, a coax 
cable should run to the TV or power supply (if using an amplifier). 

If replacing an existing antenna with the FreeVision antenna, simply 
disconnect the coax cable from the existing antenna, and connect the 
coax cable to the FreeVision antenna. 

If there is a weak or intermittent signal when using an existing coax cable, 
there may be a problem with the existing coax cable. Connect one end 
of a different coax cable to the antenna and the other end directly to 
the TV. If the signal improves, there may be a problem with the existing 
coax cable. If you have any questions, please contact Winegard Technical 
Services at [email protected] or 1-800-788-4417.

Determine the best mounting location for the antenna—keep in mind that 
the higher the antenna is mounted, the better signal you will receive. 
Avoid obstructions (such as buildings, trees or hills) between the antenna 
and the broadcast tower—these can block signal.

Distance, obstructions and compass heading all play a role in deciding on a 
location to permanently mount the antenna. For this reason, try the antenna 
in several locations, checking signal on multiple channels to determine the 
location that will provide the best signal. Moving the antenna three feet in 
one direction is often enough to change the reception.

Refer to wiring diagrams at www.winegard.com/freevision for details on 
how to wire the FreeVision antenna so that it enhances your existing cable 
or satellite package.

ATTIC  

This is the best mounting 

option when you want 

the antenna to be out of 

sight. Signal loss may be 

experienced. 

OUTDOOR

(roof, side of house, deck)

Direct line of sight from the 

antenna to the broadcast 

tower provides the strongest 

signal strength and maximum 

channel reception.

GOOD BETTER

3 4

For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 

8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281

Содержание FreeVision








Отзывы: