3
Receiver Setup for a New
Wally
®
Receiver
If using a new Wally receiver with the DISH
®
Playmaker
®
/
DISH
®
Playmaker
®
Dual antenna, the receiver will go through
an Installation Wizard to help with the setup process.
Follow the on-screen instructions to program the remote control.
Step 1 of the Installation Wizard will pair the remote to the
receiver. During Step 2, the unit will need to acquire satellites
and may update the receiver (figures 1-6).
This step will require a search initiated by the Mobile Setup
screen. Fill in the required information, and then select “Scan”
to begin the search routine (figures 1-3).
During the search routine, the antenna will scan for satellites.
The antenna may make a slight grinding sound when searching
for satellites; this is normal and does not harm the unit.
Once the search routine is complete, the receiver may
update (figure 4).
If not already activated, the receiver will need to be activated
(figure 5). To activate the receiver, call Winegard Company at
1-866-593-0348.
The receiver may reboot automatically as part of the update
process (figure 6). If so, select the state of your current
location on the Mobile Antenna Setup screen as in figures 1
and 2. Press “Scan” to begin the search routine.
The satellite will search for and acquire satellites.
NOTE
If the receiver reboots at this time, restart (see figures 1
&
2
)
.
Figure 6
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5