10
Light:
Turns the Interior Light ON and OFF
Display Window:
Displays Temperatures
Temp
Up
Increases Temperature
Temp
Down
Decreases Temperature
Set
:
Press the temperature SET button, the temperature display will
start flashing. Use the Temp Up and Temp Down buttons to
adjust the temperature
°C/°F:
Press and Hold the LIGHT button for 3 seconds to toggle the
display between Celsius and Fahrenheit
Setting the Temperature Control
NOTE: Temperature readout indicates set temperature while programming then
reverts to the actual temperature.
1.
Press the SET button, the temperature display will start flashing.
2.
Set the desired temperature by pushing the Temp UP or DOWN button.
3.
Temperatures increase or decrease 1°F with each push of the UP or
DOWN button.
NOTE: Temperatures may fluctuate depending on whether the interior light
is ON or OFF and depending on the position of the bottles.
Replacing the Charcoal Filter
Located on the back wall of your wine cellar, Turn
counterclockwise to unlock, then remove. Replace with a
new filter, turn clockwise to lock in place. Reorder part #:
264 08 44 at www.WineEnthusiast.com
