Assembly GUIDE
or visit
wineracksamerica.com
Questions?
888.373.6057
Base Horizontal Display
Page 2
1. Find an open, flat area in which to work. Carefully remove all components from the box and remove any packaging
materials. Check the parts list to verify package contents.
1
START WITH
4 CORNERS
2.
Begin by attaching 4 metal rods into the pre-drilled holes on the four corners of each side piece. Using an allen wrench
or drill, carefully attach each metal screw to the 4 metal rods.
Do not tighten until ALL metail rods have been
attached.
Be sure that the notches on the side panels are both facing inwards and at the bottom. (figure 1)
3. Attach the remaining metal rods to the side panels using the provided metal screws. (figure 2)
Do not tighten screws until ALL rods have been attached. After are attached, carefully tighten each metal screw
all the way. *Do not overtighten.
2
ATTACH REMAINING
METAL RODS
Notches
