Fig.2
4). Keep the Vacuum Preserver as straight as possible and in line with the wine bottle.
5). Push down on the wine stopper using light, steady pressure
and press the power ‘on’ button at the same time.
6). The Wine Preserver starts to work removing the air from the bottle while making a vacuum noise
.
The blue vacuum indication light on the top will light up while in
use.
7). The motor will stop working after 15 seconds.
The beep will sound when the motor stops.
8). Do not remove the unit from the bottle unit the motor stops.
9). Remove the Wine Preserver and replace on its charging base until it is needed again.
Note:
The non-slip mouth may attach itself to the wine stopper. In this case, hold the wine stopper and the neck of the bottle
securely in one hand and tilt the Wine Preserver away from the wine stopper to break the suction. This should prevent air
from re-entering the bottle. If in doubt, repeat the above operating process.
Suggestion:
For more than half a bottle of wine remaining
– one session should suffice. For less than half a bottle we suggest you repeat the above process a 2nd
time.
4
Date Indicators
1. Use the “ ▼ ” symbol to indicate the date when the bottle was sealed with your Wine Vacuum Preserver.
2. Gently swivel the silver ring to left or right un
til the correct date is in line with the “ ▼ ” symbol (Fig.3).
