16
PREPARATION BEFORE OPERATING
UNPACKING AND CLEANING THE CELLAR
• Remove the exterior and interior packing materials.
• Let the appliance stand upright for approximately
24 hours
before connecting it to the power source, which
helps to reduce the possibility of a cooling-system malfunction from handling during transportation.
• Use a soft cloth to clean the interior surface with water.
• Install the door handle provided with the appliance by following these steps:
-
Remove the gasket on the internal
door to expose the two screw holes
.
-
Install the handle with the
screws and washers provided.
-
Restore the gasket.
LOCK & UNLOCK THE DOOR
•
Insert the key into the lock and turn it counter-clockwise to unlock the door. To lock it,
please follow the reversed operation. Please save the key well.
OPERATING THE CELLAR
WORKING CLIMATE
•
The appliance is designed for operating from SN to N climate (see below climate class
chart). It is recommended to maintain the ambient around 22-25°C
(71-77ºF) which helps
the appliance working with low power consumption.
Climate Class
Ambient Temperature
SN
10 - 32 °C (50-90ºF)
N
16 - 32 °C (61-90ºF)
ST
18-38 °C (64-100ºF)
T
18-43 °C (64-109ºF)
•
If the ambient temperature is above or below the designed climate range, the
performance of the unit may be affected. For example, the appliance operating in extreme
cold or hot conditions may cause interior temperatures to fluctuate, and the temperature
set 5-22°C may not be reached sometimes.
STORAGE
•
The standard shelves are designed for bottle storage. The maximum loaded bottles may
vary subject to the different size or dimension of bottles you store.
•
To prevent damaging the door gasket, make sure to have the door opened fully all the
way before pulling the shelves out.
• Please store wine in sealed bottles.
Flat Washer
Screw
Screw
Gasket
Handle
Door Frame
