Windster WS-38 Series Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 24

Windster WS-38 Series Скачать руководство пользователя страница 22

WARRANTY / CONTACT US

21

WHAT IS NOT COVERED BY MANUFACTURE WARRANTY

1. Damages resulting from any of the following:

a. Improper installation or maintenance
b. Any repair, modification, alteration or adjustment not authorized by

the manufacturer or an authorized service dealer

c.  Misuse and/or accidents
d.  Incorrect electric current, voltage or power supply
e.  Improper setting of any control (Pressing  multiple selections at the

same time)

f. Improper chemical cleaning (commercial or industrial cleaning agents)

2. Products purchased for use in a commercial or industrial setting (such as in a

hotel, office, restaurant, or other business)

3.  Damage resulting from natural disasters (earthquake, flood, storm, etc.)
4.  Aluminum Filters, Baffle Filters, Charcoal Filters, and Oil Cup Filters
5.  Light Bulbs

CONTACT US

Windster Hoods, Inc.

www.windsterhood.com

© Windster Hoods, Inc.

Toll Free: (877)350-5215

Email: [email protected]

Information subject to change without notice.

«
...
20
21
22
23
24
»

Содержание WS-38 Series

























Отзывы:

Нет отзывов