Windsor Carpet Maintainer IM 10066360, Руководство по эксплуатации

Страница: 11 / 53

86269870 CARPET MAINTAINER 11
Operations
Machine Operation
Pre-Run Inspection
Perform a pre-run inspection to find possible problems
that could cause poor performance or lost time from
breakdown. Check the rating plate to confirm voltage
and frequency is the same as the power supply. NOTE:
A 10% variation in voltage is acceptable.
Starting Machine
NOTE: Perform pre-run machine check before
operating machine.
FOR SAFETY: Before starting machine, make sure
that all covers are in place and secured properly.
1. Connect the machine to a power supply.
2. Release the handle lock.
3. (a) Press green button to power on the
machine,120V only.
(b) Set black on/off switch to "on" position, 230V
only.
4. Press green button to start brushes.
After applying a light spray of diluted interim carpet
cleaner onto the carpet using a pressurized tank
sprayer, commence cleaning by pushing and pulling
the machine slowly over the wetted carpet.
Move the machine in multiple directions and overlap-
ping strokes.
For best results use Windsor iCapsol or Prochem
ProCaps products.
Starting Machine - Deluxe
NOTE: Perform pre-run machine check before
operating machine.
FOR SAFETY: Before starting machine, make sure
that all covers are in place and secured properly.
1. Connect the machine to a power supply.
2. Release the handle lock.
3. (a) Press green button to power on machine, 120V
only.
(b) Set black on/off switch to "on" position, 230V
only.
4. Press green button to start brushes.
5. Press and hold blue button to spray chemical.
Once machine is plugged in spray function is oper-
ational.
Apply a light spray of diluted interim carpet cleaner onto
the carpet using the onboard spraying system. Spray
chemical while pushing the machine forward. Brush
the chemical into the carpet while pulling the machine
slowly over the wetted carpet. Move the machine in
multiple directions and overlapping strokes.
For best results use Windsor iCapsol or Prochem
ProCaps products.
Flammable materials can cause an explosion or fire.
Do not use flammable materials with this machine.