Windsor 1.005-294.0, Руководство по эксплуатации, Страница: 29 / 53

29
Maintenance
Cleaning the machine:
Clean the machine with a soft cloth and a neutral pH cleaner.
Cleaning the spray system:
Rinse the spray system after each application to prevent clogging of the hoses, filters and the pump system.
To rinse the spray system, install a bottle filled with clear water and place a Absorbent pad in front of the spray jets.
Rinse the system by holding down the black spray button on the machine’s handle for at least 30 seconds.
If the spray nozzles get clogged, remove the caps and soak the brass parts of the spray nozzles and filters in a
degreasing solution (like acetone) for about 15 minutes.
If the spray nozzles are leaking, replace the filters
When assembling the nozzles, make sure that the nozzle holes are aligned horizontally to achieve a uniform spray
pattern
Changing the Velcro driver discs
Remove the eight outer screws that fasten the Velcro disc on the driver plate. To save time, use an electric screw-
driver with a #3 Phillips Head bit.
The Number #3 Phillips head bit is slightly larger than standard size. It is important that you are using a #3 Phillips
Head bit, as smaller bits can damage the screw heads and produce sharp edges which can damage the cleaning
pads.
L'embout de tournevis Phillips numéro 3 est légèrement plus grand que la taille standard. Il est important que vous
utilisiez un embout de tournevis Phillips numéro 3, puisque des embouts de taille inférieure peuvent endommager
les têtes de vis et laisser des arêtes vives, qui peuvent endommager les tampons de nettoyage.
Attach a new Velcro disc to the driver plate using the eight screws.
Make sure that the screws are very tight, not loose. If the screws are the slightest loose it can cause damage to the
Velcro disc.
Assurez-vous que les vis sont bien serrées. Si les vis sont moindrement lâches, elles peuvent causer des
dommages au disque Velcro.
Ensure that the four holes in the middle of the Velcro disc are aligned with the screws located on the driver plate.
An exact alignment allows an easy removal and installation of the driver plate.
86375030 Manual