5
PACIFIC PLUS
1.0 INSTALLATION
1.1 TOOLS
−
rule
−
pencil
−
2.5 mm, 5 mm, 6 mm, 8 mm and 10 mm Allen keys (included in delivery
package)
−
9 mm and 10.5 mm drill bits
−
10 mm, 17 mm and 19 mm ring/fork wrench/spanner
−
Sikaflex sealing compound
−
rubber mallet
−
drill
1.2 INSTALLATION OPTIONS
MP 0 standard bracket left/right 900/910
MP 1 standard bracket with extension left/right 920
MP 2 standard bracket with tubular extension left/right 930
MP 3 standard bracket with tubular extension and cross brace 940/941/955
Where two digits are given, the first refers to the UPPER mounting bracket type and
the second to the LOWER mounting bracket type.
EXAMPLES OF DESIGNATIONS USED
MP 10 upper mounting bracket type 1, lower type 0
MP 01 upper mounting bracket type 0, lower type 1
MP 12 upper mounting bracket type 1, lower type 2
MP 31 upper mounting bracket type 3, lower type 1
MP 30 upper mounting bracket type 3, lower type 0
MP 13 upper mounting bracket type 1, lower type 3
1.3 POINTS TO CONSIDER BEFORE INSTALLATION
1.3.1 ASSEMBLING THE SYSTEM AFTER DELIVERY
PENDULUM RUDDER MODULE
−
The pendulum rudder module was partially assembled before leaving our
premises.
−
Place the base of the windvane assembly 130 on windvane shaft 140 and fasten
with the Allen key (5 mm) such that bolt 132 engages in the hole in the windvane
shaft 140.
−
Guide push rod 150 through ring 152 from below.
−
Set washer 153 and nut 154 on the top of the push rod and tighten.
−
Now unscrew nut 154 very slightly (1/8 of a turn).
−
The windvane assembly should now be able to rotate freely about the push rod
150.
AUXILIARY RUDDER MODULE
−
The auxiliary rudder module was fully assembled before leaving our premises.