Spindle actuator WMS 306
Note:
Ensure that the actuator voltage coincides with that
indicated on the type plate.
Only permit fully trained qualified personnel to carry
out installation and maintenance work.
It must be ensured that all pertinent and valid
regulations and guidelines are adhered to.
The user/owner has to check and if necessary adapt
all dimensional information on site.
Check the electrical installation prior to starting up in
accordance with the national safety regulations.
Installation examples:
Technical data:
Operating Voltage:
Max. current consumption:
Max. force:
Stroke:
Speed:
Switch-on duration:
Load switch-off:
Protection type acc. to DIN VDE 0470 Part 1
Temperature cond.:
Connection cable:
Housing:
24V DC (+30% -20%). Max.20% residual ripple
1A
600N
300, 500, 750mm
8mm/s (full load)
max. 3 min per 10 min. (30%)
integrated electronic load switch-off
IP 54
-5°C to +75°C
Silicone, grey, 2,5m
Aluminium-tube, natural anodised, EV1
Diagram
Force (N)
Stroke (mm)
600
400
200
0
500
600
700
400
300
200
100
800
1000
Description:
Safety spindle drive to actuate vents and rooflights,
for comfort ventilation
- housed in a round aluminium tube,
- maintenance free through permanent lubrication,
- outer parts corrosion-free,
- heat resistant silicone connection cable,
- sturdy construction.
The
spindle actuator automatically switches off when
it reache its end positions due to the built-in electronic
load switch-off.
2,5m
323
Ø14
Ø6,2 / Ø8,2
7
Ø18
Ø36
35
Wma 200770-0818 ©2007, 2018 ®WindowMaster is a registered trademark used under licence by WindowMaster International A/S
page 1 of 2
Technical information
Op Cl
brown
Rated voltage
24V DC
white
800
WMS 306
Item Description:
Note
We reserve the right to make technical changes
