PARTS
ASSEMBLY INSTRUCTIONS
Fig. 1
1. Pass the power cord (b) through the “Front” and “Back”
pedestal pieces (c).
2. Snap the two parts of the pedestal (c) together (the back
being the side with the holes) and secure with the six
screws using a Phillips (cross-head) screwdriver. Fix the
pedestal to the bottom of the Fan Body (a) with the six
short screws with a Phillips (cross-head) screwdriver.
3. Pass the power cord (b) through the center hole of the
base after snapping the two pieces together (The back
piece is the one with the power cord securing channel).
4. Line up the pedestal on the base. Fix with the 4 long
butterfly screws (h) by turning the screws.
5. Weave the cord through the cord securing channel and place
the cord fastener (g) over the cord and secure with the two
screws.
(d) Base
(e) Bottom of base
(g) Cord fastener
(f) Cord securing
channel
(b) Power Cord
(a) Fan Body
(c) Pedestal
Fig. 1
