FOR YOUR SAFETY
IMPORTANT INSTRUCTIONS
Read and save these important safety instructions before using this fan. When
using electrical appliances, basic safety precautions should always be followed
including the following:
1) Use this fan only as described in this manual. Other uses not recommended
may cause fire or electric shock.
2) This product is intended for household use ONLY and not for commercial,
industrial or outside use.
3) To protect against electrical shock, do not place fan in window, immerse unit,
plug or cord in water, or spray with liquids.
4) Close supervision is necessary when any appliance is used by or near
children.
5) Unplug the fan from the outlet when not in use, when moving fan from one
location to another and before cleaning.
6) Do not operate the fan in the presence of explosive and/or flammable fumes.
7) Do not place the fan or any parts near an open flame, cooking or other
heating appliance.
8) Do not operate the fan with a damaged cord, plug, after a malfunction or if
dropped or damaged in any manner.
9) Avoid contact with moving fan parts.
10) To disconnect, grip the plug and pull it from the wall outlet. Never yank
the cord.
11) The use of attachments is not recommended and may cause hazards.
12) Always use on a dry level surface.
13) Do not operate if the fan housing is removed or damaged.
14) This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
WARNING: To reduce the risk of fire or electrical shock, DO NOT USE
THIS FAN WITH ANY SOLID STATE SPEED CONTROL DEVICE.
SAVE THESE INSTRUCTIONS
OPERATION
To turn on the fan, rotate the control knob clockwise to either of the
three speed settings: (1) Low (2) Medium or (3) High. To turn the fan
off, rotate the control knob counter-clockwise to (0).
OSCILLATION
To turn on the oscillation feature, pull up on the clutch knob on the top
of the motor housing. To turn off the oscillation feature, push the clutch
knob down.
OPERATING INSTRUCTIONS
