6
CLEANING
For optimal performance of your shaver it is important to
clean the blade and foil assembly after each use.
Caution: Turn off the shaver and disconnect from any
power supply before cleaning or changing the blades
and foils. Never place any portion of the shaver
or auxiliary chargers in water or other liquids for
cleaning as the unit could be damaged.
1. Press the assembly release button and carefully
remove the blade and foil assembly from the shaver
body. (see figure 1)
2.
To Clean the Hair Chamber:
Using the provided
cleaning brush, carefully sweep away any hair
collected inside the internal chamber and around the
blade shafts. A damp cloth may be used to wipe away
any remaining hair particles. Wipe with a dry cloth.
3.
To Clean the Blade and Foil Assembly:
(see figure 2)
Place the blade and foil assembly on flat
a.
surface and carefully remove the retaining ring
by unscrewing the center screw in a counter
clockwise direction until it is completely
removed.
Carefully remove one
b.
blade and foil at a time for
cleaning taking care not to
lose any parts. Please note
that each blade and foil
is a matched set and care
must be taken to assure
they are not interchanged.
This would cause poor
performance, uneven wear,
and shorten life of the
blades and foils.
Carefully brush the blade
c.
and foil with the provided
cleaning brush to remove
hair particles and rinse
with water and let dry.
Handle carefully. Excessive
pressure on the blades and
foils could cause damage.
Place the blade and foil
d.
back into the blade and foil
assembly before moving on
to the next blade.
Before reassembling, sweep
e.
away hair particles from the
retaining ring and center
screw.
CENTER SCREW
FOIL
RETAINING RING
TABS
CHROME SPRING
BLADE
ASSEMBLY
RELEASE
BUTTON
NOTCHES
HOUSING
FIGURE 2
FIGURE 1