Wind Crest UIX3019S, Инструкция по использованию, уходу и установке

Страница: 19 / 26

17
RF REMOTE MAINTENANCE:
&OHDQWKHUHPRWHFRQWUROXVLQJQRQDEUDVLYHGHWHUJHQWV
Follow instructions below for replacing battery.
8VLQJDVPDOOÀDWKHDGVFUHZGULYHUUDLVHWKHFRYHURIWKHEDWWHU\
GRRU
A
LQRUGHUWRDFFHVVWKHEDWWHU\FRPSDUWPHQW),*
5HPRYHWKHEDWWHU\DQGUHSODFHZLWKEDWWHU\W\SH
A23 12V .
1HJDWLYHHQGRIEDWWHU\VKRXOGIDFHWKHVSULQJLQVLGHWKHUHPRWH
5HLQVWDOOEDWWHU\GRRUDQGUHF\FOHROGEDWWHU\
Blower On / Speed Selection
Press to power on blower and cycle through all six blower speeds.
Blower On / Power Off
By pressing , the blowers will power on at the last speed setting. Press
again and the entire hood will power off, including lights.
Delay Off
Lights On / Dim / Off
Switch lights On by pressing once, again to dim and again to switch Off.
Blower On/
Speed Selection
1
1
2
3
4
Blower On/
Power Off
2
5 Min Delay Off
3
Lights On/Dim/Off
4
By pressing , the blower and lights will enter Delay Off mode. A dot will
appear in the lower right corner of the liner display indicating the function is
on. The blower will change to speed 1 and shut down after 5 minutes.
A
-
+
RF REMOTE FEATURES:
7KH5)UHPRWHFRQWUROLVHTXLSSHGZLWKDPDJQHWRQWKHEDFNIRUHDV\
VWRUDJH7KHUHPRWHPD\EHSODFHGRQDQ\PDJQHWLFVXUIDFHVXFKDVD
UHIULJHUDWRURUWKH:LQG&UHVWUHPRWHKROGHU),*7KHUHPRWHKROGHUFDQ
EHLQVHUWHGLQWRDVWDQGDUGHOHFWULFDORXWOHWIRUHDV\VWRUDJH1RWH7KH
UHPRWHKROGHUGRHVQRWFKDUJHWKH5)UHPRWH
0D[LPXPUHPRWHFRQWUROFRPPXQLFDWLRQGLVWDQFHLVIHHWIURPWKHOLQHU
SYNCHRONIZATION: 7RFUHDWHDXQLTXHOLQNEHWZHHQ\RXUOLQHUDQGUHPRWHFRQWUROSOHDVHIROORZWKHVHVWHSV
:LWKOLQHURIISUHVVDQGKROGWKH³OLJKWV´EXWWRQRQWKHOLQHUXQWLOWKHOHWWHU³)´VKRZVRQWKHGLVSOD\VFUHHQ
3UHVVWKH³OLJKWV´EXWWRQRQWKHUHPRWHWKHOLJKWVRQWKHOLQHUZLOOWXUQRQDQGV\QFKURQL]DWLRQLVFRPSOHWH
Features & Controls –
RF Remote Control
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compli-
ance could void the user’s authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer
or peripheral device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) This device
may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause
undesired operation.
RF REMOTE FUNCTIONS:
7KLVUHPRWHFRQWUROPD\RSHUDWHLQKXPLGHQYLURQPHQWVEXWQRWZKHQSODFHGRQDZHWVXUIDFH
),*
),*