Wincor Nixdorf TH420, Руководство пользователя

Страница: 44 / 64

Be extremely careful changing any of the printer settings to avoid
inadvertently changing other settings that might affect the performance of
the printer.
See "Configuring the printer" for instructions on how to enter the
configuration menu.
En ab le or dis ab le data sco pe mode
The data scope mode test prints a hexadecimal dump of all data sent to the
printer: “1” prints as hexadecimal 31, “A” as hexadecimal 41 and so on. This
helps troubleshoot communication problems and runs during a normal
application (after being enabled through printer configuration).
Data scope mode is usually considered a level 1 diagnostic test.
Data scope mode is enabled and disabled by selecting the “Diagnostic
Modes” sub-menu of the configuration menu.
Press the paper feed button as instructed on the “Diagnostic Modes Menu”
to enable or disable the data scope mode test.
n
Off, normal mode (Data scope mode disabled)
n
Data scope mode (enabled)
Press the paper feed button for at least one second to validate the selection.
To run the data sco pe mode
n
After you have enabled the data scope mode, exit the configuration menu.
n
Run a transaction from the host computer.
All com mands and data sent from the host com pu ter will be prin ted as
he xa de ci mal cha rac ters.
To exit the data sco pe mode
n
Enter the configuration menu again.
See “Con fi gu ring the prin ter”.
n
Disable the data scope mode.
n
Exit the configuration menu.
The prin ter is on-line and can com mu ni ca te nor mal ly with the host
com pu ter.
COM MU NI CA TI ON IN TER FA CE
38