Wincor Nixdorf TH230+, Руководство пользователя

Страница: 10 / 35

4 TH230+ Thermal printer
General Safety Information
Before installing and using the printer, please read the following items
carefully.
Safety instructions
Do not touch the cutter and tear bar of the printer.
The print head is a thermal element and it is at high tempera-
ture during printing or just after operation, therefore please do not
touch it and its peripherals for safety reasons.
The thermal head is an ESD-sensitive device. To prevent dam-
age, do not touch either its printing part or connecting parts.
Cautions
- Install the printer on a flat and stable place.
- Reserve adequate space around the printer so that convenient
operation and maintenance can be performed.
- Keep the printer away from water source.
- Do not use or store the printer in a place exposed to heat of fire,
moisture, serious pollution and direct sunlight.
- Do not place the printer on a place exposed to vibration or impact.
- No dew condensation is allowed to the printer. In case of such conden-
sation, do not turn on the power until it has completely gone away.
- Connect the DC adapter to an appropriate grounding outlet.
- Disconnect the DC adapter when the printer is not used for a long time.
- Don’t spill water or other materials on the printer. If this happens, turn
off the power immediately by means of the ON/OFF button.
- Do not allow the printer to start printing when there is no recording pa-
per installed, otherwise the print head and platen roller will be
damaged.
- To ensure print quality and normal lifetime, use recommended or good
quality paper.
- Shut down the printer when connecting or disconnecting interface
connectors to avoid damages to the control board.