Now remove this key from the key-
board by pulling upwards.
If the key that has been removed
carries a number or character, you
can change the lettering as follows:
Using a thin object (e.g. paper-clip
etc.), press upwards against the
plastic cover through the opening on
the underside of the key. Please
refer to the next chapter for instructi-
ons on how to insert the new label.
Mounting keys
Inserting Key Labels
Below, you will find instructions on how to insert the key labels:
Each key should be labelled indivi-
dually. You can use the empty labels
delivered with the system to do so.
Place the written label on the key
cap.
Insert the transparent key cover with
the mat and concave side upwards
until it clicks into place in the key cap.
Label for keys
Key cap
Transparent key cover
with mat and concave
side up
Mounting keys
GB - 6
