Swipecard Reader (optional)
The TA 61-2 is equipped with a swipecard reader (SCR) which enables all
tracks of the swipecard reader to be read simultaneously when the card is
swiped through once.
Using the Swi pe card Rea der
Pull the magnetic card through the slot of the swipecard reader evenly and
quickly as far as it will go from right to left. Make sure that the magnetic
stripe is horizontally facing the keys.
Note the following precautions when handling magnetic cards:
n
Ne ver al low mag ne tic cards to come into con tact with li quids.
n
Ne ver bend or fold mag ne tic cards.
n
Ne ver ex po se mag ne tic cards to a mag ne tic field.
Insert the magnetic card in the special slot provided on the reader from the
right-hand side only; inserting the card at another location could damage the
read heads.
Clea ning In struc tions
In order to ensure that the quality of reading results is maintained, clean the
swipecard reader at least once a week. To do this, use the special cleaning
card that can be ordered from Wincor Nixdorf.
Connection Method
The connector for the keyboard is a standard 6-pin mini-DIN connector.
The cable is 1 meter long. This cable
can be extended an additional 2 meters
by means of a standard cable that can
be ordered optionally.
11
SWIPECARD READER (OPTIONAL)
