PSA /go
5
Battery Pack
The battery pack should not be opened, destroyed or incinerated since they may leak or rupture,
and release the ingredients they contain into the environment.
Handling: Do not crush, pierce, short-circuit (+) and (-) battery pack terminals with conductive (i.e.
metal) materials. Do not directly heat or solder. Do not throw into fire. Keep battery pack in non-
conductive (i.e. plastic) trays.
Storage: Store in a cool (preferably below 25°C) and ventilated area away from moisture, sources
of heat, open flames, food and drink. Keep adequate clearance between walls and battery pack.
Temperature above 45°C may result in battery pack leakage and rupture. Since short-circuit can
cause burns, leakage and rupture hazard, keep battery pack in the original packaging until use and
do not jumble it.
Conditions to avoid:
- Heat above 60°C or incinerate.
- Deform, mutilate, crush, pierce, and disassemble.
-
Short-circuit.
- Prolonged exposure to humid conditions.
Temperature range:
Continuous
Occasional
in storage
-20/+20°C
-30/+45°C
during discharge
-20/+60°C
-20/+70°C
during charge
0/+45°C
0/+50°C
Charging policy of PSA /go device
How to efficiently charge the battery
Insert PSA /go device into Docking Station or connect it to the Travel plug. Suspend the device – in
suspend mode device uses minimal power.
Here are some tips / tricks how to save more power in your battery:
- always put the PSA /go device on charge during the night
- check the battery status (see section
Control Panel Utilities / Power
) and when battery is low
put device on charging
- notice that battery is properly charged only at temperature within 0°C to +45 °C because of
lithium–ion
material.
- to save power you can also reduce LCD backlight, see ‘Advanced Backlight’ in Section ‘Dis
play’
