Wincor Nixdorf KA19, Руководство пользователя

Страница: 16 / 17

Appendix
Installation instructions
The base plate must be separated from the cash drawer before it can be
installed. A screwdriver must be inserted into the emergency open hole in
order to do so.
The bore-holes on the base plate are for securing the unit:
Hole 1-6 Mounting holes
Emergency open The position of this hole is marked on the
diagram (8).
The screws which are required depend on the arrangement of the table.
The screws and rivet heads must not project beyond the edge of the base
plate.
An all-round clearance of at least 2 mm must be allowed when the cash
drawer is installed.
Installation
Install the base plate on the checkout desk so that it is level and horizontal.
Use flatheaded screws to do this. The recommended securing bore-holes
are the positions 1 to 6 (see Fig. A).
Figure A
INSTALLATION INSTRUCTIONS
10
2
3
4
5
1
6
8