iCASH 15 – Cleaning Instruction
1
General Informations
The device must be switched off for service and maintenance work.
You should service and clean the parts of the device listed below at the specified intervals.
In addition, please note the following:
Take care not to drop any cleaning liquids into the device.
Only use the cleaning material listed in this manual. Do not use thinners.
Information where to order the listed cleaning materials is given in the chapter "Cleaning materials".
Maintenance
Check the dust box once a day and empty it if necessary.
Perform a visual inspection of the coin hoppers and coin paths.
Clean the coin paths.
Cleaning the housing
Cleaning interval:
as needed
Cleaning material:
Wet cleaning cloths
for stainless steel surfaces
Ballistol oil for cleaning stainless steel
for varnished surfaces
Wincor Nixdorf cleaning set
for plastic surfaces
Wincor Nixdorf cleaning set
Cleaning the coin paths
The
conveyer belts
must not come into contact with alcohol.
Clean the coin paths with compressed air.
Cleaning interval:
when necessary, at least once a month
Cleaning material:
Wincor Nixdorf air duster
Cleaning the coin validator
Clean the coin validator with cleaning swabs.
Cleaning interval:
when necessary, at least once a month
Cleaning material:
Cleaning swabs
Except for the Coin Validator all components of the iCASH 15E must be cleaned
and maintained by trained and authorized Service personnel only! Unauthorized or
inexpert cleaning or maintenance will invalidate your warranty and liability protection.
