Wincor Nixdorf CINEO C4080, Руководство по установке

Страница: 156 / 194

Start-up Installation
144
CINEO C4080 - Installation Guide 01750223447 D
Check power plugs on the power distributor
i
You have to check that the power plugs are fitted correctly before
using the power switch on the power distributor.
Plug all power plugs (1) in the power
distributor.
i
The number of power plugs
depends on the individual
configuration.
Start-up UPS PW 5115 RM
–
The power outputs could be still applied voltage, even if the UPS is
not connected to an AC source.
–
Because of the short circuit current batteries can cause electric
shocks and burns. Therefore remove watches, rings and other
metallic objects, before replacing the battery. Only use tools with
insulated handles.
–
Never combust a battery, because it may explode.
–
Don't open or damage the battery; effluent electrolyte is harmful for
skin and eyes.
i
Before the start-up of the CINEO C4080 there has to be a plug
connection inside the UPS.
The mounting position of the UPS depends on the device and the
actual positioning may be different.
Open the CINEO C4080 and pull the printer carriage as far as possible out
of the UPS (for its position in the CINEO C4080 please refer to the chapter
"Device Overview", for its accessability to the chapter "Basic Operation"
inside the operating manual).