BEETLE /iPOS plus User Manual
53
Sub Menu
ACPI Settings
ACPI Settings
ACPI Sleep State
[S3 (Suspend to RAM)]
Wake Up By Ring
[Disabled]
ACPI Sleep State
[S3 (Suspend to RAM)]
Sets the standby/sleep modes referring to Advanced Configuration and
Power Interface operating states.
S3: The current status of the operating system and applications is written
on the main storage which is the only powered component at this time.
The power supply is in soft off mode. The system wake-up only needs a
few seconds. No boot procedure.
S1: Sets the PC to an energy saving mode. A few functions are turned off.
When a key is pressed all functions will be available again.
Configuration options: [S1 (CPU Stop Clock)] [S3 (Suspend to RAM)]
[Suspend Disabled]
Wake Up By Ring
[Disabled]
This allows enabling or disabling power up the BEETLE when the modem
receives a call while the BEETLE is in Soft-Off or Hibernate mode.
The BEETLE cannot receive or transmit data until the system and
applications are fully running, thus connection cannot be made on
the first try. Turning an external modem off and then back on
while the BEETLE is off causes an initialization string that will
cause the system to power on.
Configuration options: [Disabled] [Enabled].
Sub Menu
RTC Wake Settings
Wake system with Fixed Time
[Disabled]
This allows enabling or disabling power up the BEETLE on specific time
while the BEETLE is in Soft-Off or Hibernate mode. If this option is enabled
a wake time is programmable within next two lines. The first line is setting
the hour in international format(0-23). The second line is setting the
minutes(0-59). Configuration options: [Disabled] [Enabled].
