Wincor Nixdorf BEETLE NetPOS, Руководство пользователя

Страница: 21 / 47

The COM2 interface is without effect if the onboard TFT adapter with touch
screen function is installed.
Customer display (COM2* or COM4*)
With the BEETLE NetPOS, and depending on the system´s configuration,
the customer display is connected to either the COM2* or COM4* serial
interface. The interface connection is a 9-pin D-sub jack. Make sure that the
connector for the customer display is screwed firmly to the socket to prevent
possible malfunctioning. Power is supplied via this jack.
Cashier display (COM3*)
Connect the cashier display to the serial interface COM3*. This port is a
9-pin D-sub jack.
Make sure that the connector for the cashier display is screwed firmly to the
socket to prevent possible malfunctioning.
Monitor
If a CRT adapter is installed, you can connect a monitor to the system via
the 15-pin D-sub jack on the CRT adapter. The power supply of the monitor
is done by the rubber socket of the external power pack. The socket is
situated at the front of the power pack.
17
CONNECTING PERIPHERALS