BEETLE/ M-II
_____________________________________________________________________
_________________________________________________________________
7
When installing the BEETLE M/-II, also make sure that the
calibration
seal and calibration switch
on the rear side of the device are
visible
and readily
accessible
! If it is accessible from only one side, turn the
device (for example 180 degrees vertically) so that the rear sides point
outwards (to the access side).
Technical Specifications
Footprint
Width
Depth (w/o cable cover)
288 mm
286 mm
Height
155 mm
Weigth
approx. 7 kg (depending on the installation)
Weight of battery with panel
approx. 930 g
Power consumption (typical)
3A / 5A max.
Line voltage frequency
50 / 60 Hz
Noise generation
< 47 dB (A)
Power input ratings
100 – 120 V / 2A max.
200 – 240 V / 1A max.
Operating temperature
EN 60721-3-3, class 3k3
Environmental test IEC 68 / EN60068
Air temperature
:
+5° C to +40° C
Humidity
:
5% r.h. (1 g/m 3 ) – 85% r.h. (25 g/m 3 )
Temperature fluctuation
: 0.5 K/min (max. 7.5K/30 min)
Atmospheric pressure
70 kPa – 106 kPa
(70 kPa corresponds to installation approx. 3000m above sea level)
Installation environments with long exposure to the sun should be avoided
