Changing the receipt roll
If a red stripe appears on the printed receipt or if the “End of receipt”
message appears on the cashier display, install a new receipt roll
following the instructions below:
Remove receipt roll
Lift up the paper
compartment cover
to access the paper
rolls. To remove the
remaining paper,
press the green
paper feed button
(see illustration).
Then remove the
empty paper core.
Now skip to the
instructions under
“Insert receipt roll“.
If unused receipt paper still remains on the receipt roll, remove it as
follows:
Remove the receipt roll from the paper compartment and sever the receipt
paper so that you have an even edge. Now use the green button to
remove the remaining paper. For more details, see the description of your
POS application program.
Be careful to leave enough receipt paper so that it can be
removed. If it is not possible to remove the paper using the
paper feed buttons, you can also remove it easily by hand.
If you are unable to remove the receipt paper using the paper feed
buttons, you can remove the paper as follows:
Paper feed button
The BEETLE components
The BEETLE printer
GB - 27