Wincomm WTP-8B66 Series, Руководство пользователя

Страница: 22 / 28

16
COM3 Configuration
Set Parameters of COM1
Serial Port
Enable or Disable Serial Port (COM)
COM4 Configuration
Set Parameters of COM1
Serial Port
Enable or Disable Serial Port (COM)
COM Port IRQ Mode
Set COM Port IRQ Mode
WDT Timeout Reset
Enable/Disable Watch Dog Timer Timeout to reset system.
ACPI Configuration
Configure ACPI Settings.
Suspend to RAM
It is recommended to select auto for ACPI S3 power saving
ACPI HPET Table
Enable the High Precision Event Timer for better performance
PCIE Devices Power On
Allow the system to be waked up by a PCIE device and enable wake on LAN.
RTC Alarm Power ON
Allow the System to be waked up by the real time clock alarm. Set it to By OS to let it be handled by
your operating system.
USB Configuration
Configure the USB support.
Intel USB3.0 Mode
Mode of operation of Intel USB3.0 controller.
Legacy USB Support
Enable Legacy USB support. AUTO option disables legacy support if no USB devices are connected.
DISABLE option will keep USB Devices available only for EFI applications.
USB3_0_2H_1 Power
Select USB3_0_2H_1 power to +5VSB or +5V.
USB2_0_1 Power
Select USB2_0_1 power to +5VSB or +5V.
USB2H_2_3 Power
Select USB2H_2_3 power to +5VSB or +5V.
USB2H_4_5 Power
Select USB2H_4_5 power to +5VSB or +5V.
Trusted Computing
Trusted Computing Settings.
Security Device Support
Enables or Disables BIOS support for security device. O.S. will not show Security Device. TCG EFI
protocol and INT1A interface will not be available
Device Select
TPM1.2 will restrict support to TPM1.2 devices, TPM 2.0 will restrict support to TPM 2.0 device, Auto will
support both with the default set to TOM 2.0 devices if not found, TPM 1.2 devices will be enumerated.
Instant Flash
Save UEFI files in your USB storage device and run Instant Flash to update your UEFI. Please note that
your USB storage device must be FAT32/16/12 or NTFS files system. Only root directory is working on
NTFS drive.