Wincomm WMP-17F, Руководство пользователя

Страница: 22 / 73

WMP-17F User’s manual 8
For transmitters rated at a maximum output power not listed above, the
recommended separation distanced
in meters (m) can be estimated
using the equation applicable to the frequency of the transmitter, where P
is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher
frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures,
objects and people.
Guidance and manufacturer’s declaration – electromagnetic
immunity
The model WMP-17F is intended for use in the electromagnetic
environment specified below. The customer or the user of the model
WMP-17F should assure that it is used in such an environment.
Immunity test IEC 60601
test level
Compliance
level
Electromagnetic
environment
–
guidance
Electrostatic
discharge
(ESD)
IEC 61000-4-2

6 kV contact

8 kV air

6 kV contact

8 kV air
Floors should be
wood, concrete or
ceramic tile. If floors
are covered with
synthetic material, the
relative humidity
should be at least 30
%.
Electrical fast
transient/burst
IEC 61000-4-4

2 kV for
power
supply lines

1 kV for
input/output
lines

2 kV for
power
supply lines

1 kV for
input/output
lines
Mains power quality
should be that of a
typical commercial or
hospital environment.
Surge
IEC 61000-4-5

1 kV line(s)
to line(s)

2 kV line(s)
to earth

1 kV line(s)
to line(s)

2 kV line(s)
to earth
Mains power quality
should be that of a
typical commercial or
hospital environment.