Page 8 of 12
Document No.: IM TMA227-15
Revision: A
TMM PUSH HANDLE
FIELD INSTALLATION AND USAGE INSTRUCTIONS
INSTALLING THE NEW PUSH HANDLE ASSEMBLY (CONTINUED)
2. Securley tighten the cap nut onto the bolt using the
3/8” allen wrench and 1/2” socket wrench
(Fig. 3)
.
3. Slide
one (1)
push bar grip onto the push handle
assembly
(Fig. 4)
.
4. If the device does not already have one installed,
add
one (1)
adhesive backed bumper to the back of
the device as shown
(Fig. 5)
. If the device already
has one installed, you may remove the old one and
replace it with a new one if necessary.
5. Repeat this entire process on the opposite side of
the device.
←
Fig. 3
Cap Nut
Fig. 4
←