Specifications
Capacity: 20lbs / 9kg
Increments: oz / g
Tare range: tare full capacity
Auto off: after three (3) minutes of inactivity
Operation temperature: 41°F – 95°F
Display: LCD
Mode
Press the “mode” key to select either
lbs
or
kg
as the desired unit of measurement.
Tare Weighing
1. Turn on scale.
2. Place the “tare item” on the platform.
3. Press “TARE” and wait until “0” is displayed.
4. Add the “net-weight-item”.
Calibration Check
(Must have a calibrated 5 kg or 10 kg weight)
1. Turn the scale on.
2. Press and hold “MODE” key until “CAL” flashes on screen, then 10 kg.
If you have a 5 kg item, press “TARE” until 5 kg flashes.
3. Place calibrated 5 kg or 10 kg weighted item on scale.
4. If scale is calibrated correctly, “PASS” will flash across screen.
5. Remove weight and restart unit with “ON/OFF” key.
NOTE:
If “PASS” does not flash across the screen, then the scale was not calibrated correctly or
the weight is not weighted properly.
WARNING
• Avoid any exposure to extreme heat or cold. The scale will work better when operated at
room temperature... allow the scale to acclimate to room temperature for at least one hour
prior to use.
• Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents and a close
distance to other electronic equipment can all cause an adverse effect on the reliability and
accuracy of your scale.
• Handle with care. Place any/all items to be weighed gently onto tray top. This is a precision
instrument and should be handled with extreme care.
• Not recommended to plug-in unit and use batteries at the same time.
Backlight
Turn the scale on and press the “light” key - this turns on the backlight.
Operation (On / Off)
1. Place scale on a horizontal flat surface and press the ON/OFF key.
2. Wait until “0.0” is displayed.
3. Put the object(s) on the weighing platform.
Counting Functions (PCS)
1. Turn the scale on.
2. Flip the scale plate over and place 25, 50, 75, or 100 pieces of the item being counted.
3. Press and hold “PCS” key for two seconds - the number 25, 50, 75 or 100 will show on
the screen.
4. Press “MODE” key to select the number of pieces that were placed on the plate,
then press the “PCS” key to confirm the selection.
5. Add the remainder of the items that are being counted onto the plate to get the total
quantity of items.