Winco HOME CARE CLINER Скачать руководство пользователя страница 11

Page 11 of 16

Document No.: 006122
Revision: A

OWNERS OPERATING & MAINTENANCE MANUAL

HOME CARE CLINER

Copyright © 2021 Winco Mfg., LLC

GENERAL CARE & CLEANING

• 

Periodically inspect tightness of all screws, bolts, nuts, or other fasteners every year.

• 

Lubricate pivot points on the recline mechanism with a lubricant approved by your facility every year.

• 

If equipped, periodically position the chair back into full recline position to keep the gas cylinder 
lubricated.

Winco Mfg., LLC’s full-line of products are durable and reliable when properly cared for.  

All Winco products should be:

1. 

Cleaned

2.  Disinfected (per facility policy)

3.  Rinsed

4.  Allowed to air dry

Note: Disinfecting a product is not the same as cleaning the product. Disinfectants alone will not provide adequate 
cleaning. They do not have grease or oil cutting properties to remove grime, hair, or skin oils. The appearance, 
feel, and performance of your upholstery may diminish if not cleaned properly.

Winco chairs should be cleaned with mild soap and water solution and a damp cloth on a regular basis. Avoid 
harsh detergents or chemicals that could damage the upholstery or finish of your chair. If the upholstery is 
disinfected with chemicals or bleach mixtures, the chair 

MUST

 be wiped off using only clean water on a damp cloth 

and then air dried. Failure to rinse upholstery with clean water can result in build-up of residue. Over time residue  
can dry out the upholstery and cause changes to the look and feel of the upholstery, leading to cracking. When 
cleaning or disinfecting use a dry cloth and thoroughly dry all areas that have vinyl to vinyl contact or vinyl to steel 
contact. Moisture between the vinyl and steel surfaces could cause mildew or rust.

Please refer to instruction labels or tags included with your product for complete care and cleaning instructions. 
Retain information on the label or tag for future use.

Additional information for cleaning products with Winco Mfg., LLC's selection of vinyls can be found on our 
suppliers website at: https://spradling.group/en-us/products/documents-archive/cleaning-guides.

Use caution cleaning in and around mechanisms. Keep hands clear of pinch 
points and metal edges or injury may occur. NEVER clean or maintain your 
chair while it is occupied or injury may occur. NEVER use a high pressure 
cleaner, wash tunnel, or "hose down" method to clean this product. Liquid 
may cause damage to the product and void your warranty.  

CLEANING

Содержание HOME CARE CLINER

















Отзывы: