Winco EPG-1C, Руководство по эксплуатации

Страница: 9 / 12

9
pRoblem mIGht be cAused by couRse of ActIoN
Grill not working
Power supply Check power source
Power switch has not been turned on
Check that the unit is correctly plugged in and
turned on
Plug/cord, set or external wiring is damaged
Call Winco to make service arrangements through
their service provider network
Internal wiring fault Call Winco to make service arrangements
Indicator light is on, but unit is Not
heating up
Faulty elements Call Winco to make service arrangements
Operation of thermostat
All thermostats are not turned on
Ensure thermostat is set correctly and that the
temperature select knob is firmly secured to the
thermostat shaft (not spinning independently)
Faulty thermostat Call Winco to make service arrangements
Indicator light is Not on, but the unit is
heating up
The indicator bulb has burned out Call for service. Replace the indicator light
Cooking surface is heating up too slowly
Carbon build up
Ensure that the plates are kept clean and free from
carbon build up / debris
Thermostat setting
Ensure thermostat is set correctly and that the
temperature select knob is firmly secured to the
thermostat shaft (not spinning independently)
Faulty elements Call Winco to make service arrangements
Food sticking
Carbon build up
Ensure that the plates are kept clean and free from
carbon build up/debris
Not seasoned Season grill, see Operating Instructions
Service and Repair
There are no user serviceable parts within this appliance.
To avoid serious injury or damage,
NeveR
attempt to repair the unit
yourself.
To initiate warranty service contact: support@wincous.com
or call: 973-295-3899.
DO NOT send unit to WINCO without first contacting our customer
service department.
See "Limited Warranty" section on page 10 for details.
If your WINCO Panini Grill does not operate, please check the following prior to placing a service call.
Safety
A WINCO® Approved Service Technician should carry out repairs
if necessary. Do not remove any components or service panels on
this product.
If the power cord is damaged, it must be replaced by a WINCO
Approved Service Technician in order to avoid a hazard.
Troubleshooting