5
Operation
NOTES
Do not use outdoors.
Induction range requires induction ready cookware.
Compatible pans include flat-bottom pans and/or pots with a
diameter of 4-3/4" to 10-1/4" (12cm to 26cm), made of steel, cast
iron, enameled iron, or stainless steel – please check with the pan
manufacturer to confirm induction compatibility.
If the pan is not induction ready, it will not register on the induction
range. The LED display will show “-----“ flashing when attempting
to select a heat mode without an induction ready pan on the glass
cooking surface.
The unit will automatically shut off after 90 seconds of not having an
induction ready pan on it.
1. Before turning on the power, make sure the cookware is on the
ceramic plate with ingredients inside.
2. Plug the power plug into a suitable outlet, and press the "ON/OFF"
button to turn the induction cooktop on. The "POWER" and “TIME”
lights will blink and the LED display will show “- - -”.
3. Now the unit is in standby mode. If no action is taken, the unit will
automatically turn off after 30s.
4. Press “POWER/TIMER” button, the unit turns on and set to default
power level 5. Please adjust the power level with “ ” and “ ”
buttons from 1 – 10.
5. After selecting the power level, press “POWER/TIMER” again,
“TIME” will light up . Then adjust timer with “ ” and “ ” buttons
from 0– 180min. At the end of the time cycle, the timer will beep
five times.
Control Panel
C
B
A
D E
F
A. LED Display Screen
B. Power Level Indicator Light
C. Time Light
D. Adjustment Buttons
“ ” and “ ”
E. Function Button for "Power/Timer"
F. "ON/OFF" Button
Exploded View & Parts List
MODEL: EIC-400E
1
2
3
6
4
5
# Description
Part #
Qty
1
Control Panel
EIC-EP1
1
2
Fan
EIC-EP2
1
3
Rubber Foot
EIC-EP3
4
4
Coil (including sensor)
EIC-EP4
1
5
Main Control Board
EIC-EP5
1
6
Power Cord
EIC-EP6
1
Please contact factory for special order parts not listed.
