17
OPM-125/D
B. Remove the wing nut.
C. Remove the filter element.
D. Check the rubber seal is undamaged.
E. To loosen debris, gently tap the air filter on a hard
surface. If the air filter is excessively dirty replace with a
new filter. You can use pressurized air (not to exceed
30 psi) to clean the filter. Always blow the compressed
air from inside to the outside.
F. Clean the dirt from the inside of the air cleaner body
and cover. Reinstall the filter in housing. Tighten the
wing nut securely.
G. Install and secure the cover.
H. Remove and clean the pre-filter if clogged.
