2
TM
Commercial Blender with Paddle Controls
Important For Future Reference
Introduction
Congratulations on the purchase of your ACCELMIX
TM
machine. Please take the time to carefully read through this manual to ensure the machine is
operated and maintained properly, to ensure the best possible performance from this product for many years.
WINCO will not accept liability if:
• The instructions in this manual have not been followed correctly.
• Non-authorized personnel have tampered with the machine.
• Non-original spare parts are used.
• The machine has not been handled and cleaned correctly.
• There is any use damage to the unit.
Please complete the following information and retain this manual for the life of the product. This
information is required for Warranty Service and/or parts. Please see Page 10 for more information
on your Warranty and How to Register.
Model Number
Serial Number
Date Purchased
!
!
!
!
!
!
WARNING: ImpRopeR INstAllAtIoN, AdjustmeNt,
AlteRAtIoN, seRvIce oR mAINteNANce cAN cAuse
pRopeRty dAmAGe, INjuRy, oR deAth. ReAd the
INstAllAtIoN, opeRAtIoN, ANd mAINteNANce
INstRuctIoNs thoRouGhly befoRe INstAllING
oR seRvIcING thIs equIpmeNt.
cAutIoN: these models ARe desIGNed, buIlt, ANd
sold foR commeRcIAl use oNly. If these models
ARe posItIoNed so the GeNeRAl publIc cAN use
the equIpmeNt, mAke suRe thAt cAutIoN sIGNs,
WARNINGs, ANd opeRAtING INstRuctIoNs ARe
cleARly posted NeAR eAch uNIt so thAt ANyoNe
usING the equIpmeNt WIll use It coRRectly ANd
Not INjuRe themselves oR hARm the equIpmeNt.
WARNING: A fActoRy AuthoRIzed seRvIce
pRovIdeR should hANdle All mAINteNANce
ANd RepAIR. befoRe doING ANy mAINteNANce
oR RepAIR, folloW seRvIce set up
ARRANGemeNt oN pAGe 10.
AVERTISSEMENT: TouTE INSTAllATIoN, RéglAgE,
ModIfIcATIoN, RépARATIoN ou ENTRETIEN
INcoRREcT pEuT occASIoNNER dES doMMAgES
MATéRIElS, dES blESSuRES gRAVES ou lA MoRT.
lIRE lES INTRucTIoNS d'INSTAllATIoN, d'uTIlISATIoN ET
d'ENTRETIEN ATTENTIVEMENT AVANT d'INSTAllER ou dE
RépARER cET AppAREIl.
ATTENTIoN: cES ModèlES SoNT coNçuS, fAbRIquéS,
ET VENduS pouR uN uSAgE coMMERcIAl SEulEMENT.
SI cES ModèlES SoNT plAcéS pouR quE lE gRANd
publIc puISSE lES uTIlISER, ASSuREz-VouS quE lES coNSIgNES
d’ATTENTIoN, d'AVERTISSEMENT, ET lES INSTRucTIoNS
d'uTIlISATIoN SoIENT clAIREMENT AffIchéES pRèS dE
chAquE uNITé dE SoRTE quE N'IMpoRTE quEl uTIlISATEuR dE
l'AppAREIl l'EMploIE coRREcTEMENT ET NE SE blESSE pAS ou
N'ENdoMMAgE pAS l'AppAREIl.
AVERTISSEMENT: uN TEchNIcIEN AuToRISé pAR
l'uSINE dEVRA EffEcTuER TouT l'ENTRETIEN ET lES
RépARATIoNS. AVANT dE fAIRE TouT ENTRETIEN ou
RépARATIoN, VEuIllEz coNTAcTER WINco.
XLB-1000