Winbook XP5 Pro, Руководство пользователя

Страница: 85 / 90

XP5 Pro Chapter Seven Pag e 10 of 15
• Is the disk already full? If you have saved files on this disk before, you may have reached the dis k ’s
capacity. If the disk is full, use a different disk or remove existing files from the disk to make room for
other files that you want to save.[XP5 Pro 7.14]
Problem : My Floppy Drive wo n’t read my disk.
Actions :
• Is the disk fully inserted into the disk drive? Disks only fit into the drive one way. As you insert the
disk, the circular metallic object on the disk must face down, the sliding hatch must face the opening
of the compute r’s drive, and the notched corner of the disk must face toward the right. Make sure that
the disk springs into position. The driv
e ’s eject button should spring outward when the disk is
properly inserted.
• Is the Floppy Disk Drive installed properly? While installing the drive, apply even pressure on both
sides of the drive, making sure that the exposed edge of the drive is flush with the edge of the
WinBook XP5 Pro as the drive latch locks.
• Have you formatted the disk? Some new disks are not formatted for use with your WinBook XP5
Pro. If your disk is not formatted, or if the disk is formatted for use with another type of computer,
Windows 95 will notify you. Format the floppy disk by clicking o
n My Computer , then righ t-clicking
on th e 3 ½ Floppy icon and selectin g Format .
• If you swapped the Floppy drive into the media bay without rebooting, try rebooting the system with
the drive in place.
Problem : Diskette will not eject from the drive .
Actions :
• Label may have become detached and is blocking the ejection of the disk. Visually inspect slot to see
if you can see any obstruction by the label. Call the Technical Support if you observe an obstruction
.
• Metal cover on the diskette has been bent. Call Technical Support.[XP5 Pro 7.15 ]
Booting Up
Problem : System reports an error message that is not related to any setu p Problem s.
Actions :
• Your system may have a virus which has infected the master boot record. Run a virus checking