User’s Manual
WIN Enterprises, Inc.
Feb., 2010
36
4.4.10 Remote Access Configuration
This sub menu allows you to enable or disable Remote access. If you select
[Enabled], below items will show up:
Serial port number: [COM1]
This item allows you to select the serial port for console redirection. Make sure the
selected port is enabled.
Base Address, IRQ: [3F8h, 4]
Serial Port Mode: [115200 8,n,1]
This item allows you to select serial port settings.
Flow Control: [None]
This item allows you to select flow control for console redirection.
Redirection After BIOS POST: [Disabled]
This item allows you to set Redirection configuration after BIOS POST.
[Always]: The console redirection is always active.
[Boot Loader]: The console redirection is active during POST and Boot Loader.
[Disabled]: Turns off the console redirection after POST.
