User’s Manual
WIN Enterprises, Inc.
Sept., 2010
34
Chapter 4. BIOS Setup
The ROM chip of your PL-80160 board is configured with a customized Basic
Input/Output System (BIOS) from AMI BIOS. The BIOS is a set of permanently
recorded program routines that give the system its fundamental operational
characteristics. It also tests the computer and determines how the computer
reacts to instructions that are part of programs.
The BIOS is made up of code and programs that provide the device-level
control for the major I/O devices in the system. It contains a set of routines
(called POST, for Power-On Self Test) that check out the system when you turn
it on. The BIOS also includes BIOS Setup Utility, so no disk-based setup
program is required CMOS RAM stores information for:
z
Date and time
z
Memory capacity of the appliance
z
Type of display adapter installed
z
Number and type of disk drives
The CMOS memory is maintained by battery installed on the PL-80160 board.
By using the battery, all memory in CMOS can be retained when the system
power switch is turned off. The system BIOS also supports easy way to
reload the CMOS data when you replace the battery of the battery power lose.
4.1 Quick Setup
In most cases, you can quickly configure the system by choosing the following
main menu options:
1. Choose “Exit”
Î
“Load Optimal Defaults” from the main menu. This loads
the setup default values from the BIOS Features Setup and Chipset
Features Setup screens.
2. Choose “Main” & “Advanced” from the main menu. This option lets you
configure the date and time, hard disk type, floppy disk drive type, primary
display and more.
3. In the main menu, press F10 (“Save Changes and Exit”) to save your
changes and reboot the system.
