WIN Enterprises PL-10390, Руководство пользователя

Страница: 35 / 49

35
will appear on the screen asking if you want to load the Optimized Default
Values. Press the <Y> key and then press <Enter> if you want to load the
SETUP default.
4.13 Set Supervisor/User Password
The password options let you prevent unauthorized system boot-up or
unauthorized use of CMOS setup. The Supervisor Password allows both system
and CMOS Setup program access; the User Password allows access to the
system and the CMOS Setup Utility main menu.
The password functions are disabled by default. You can use these options to
enable a password function or, if a password function is already enabled,
change the password.
To change a password, first choose a password option from the main menu and
enter the current password. Then type your new password at the prompt.
The password is case sensitive and you can use up to 8 alphanumeric
characters. Press <Enter> after entering the password. At the Next Prompt,
confirm the new password by typing it and pressing <Enter> again.
After you use this option to enable a password function, use the “Security Option