![WIN Enterprises MB-73030 Скачать руководство пользователя страница 31](http://html1.mh-extra.com/html/win-enterprises/mb-73030/mb-73030_user-manual_984422031.webp)
31
MODEM Use IRQ:
This determines the IRQ in which the MODEM can use. The choices: 3, 4, 5, 7, 9, 10, 11
and NA.
PME Event Function:
When the system enters a Soft-off mode (Standby power exist but system is not
working), it will wake up system when specific signals occurred. The BIOS monitors the
system for “activity” to determine when to enable power management.
If you enable this feature, the computer specifies that any signal noticed on the PCI
(Peripheral Component Interconnect) bus channel must make go out from the
hibernation state. The choices: Enabled and Disabled.
Soft-Off by PWR-BTTN:
This function can turn the system off with the on/off button places the system in a very
low-power-usage state, with only enough circuitry receiving power to detect power
button activity or Resume by Ring activity. The choices are Delay 4 seconds and
Instant-Off.
Power On by Alarm:
Power On by alarm presetting time during one day
IRQ Wake up Events:
Wake up system by each IRQ
After you have finished with the Power Management Setup, press the <ESC> key to
return to the main menu.
3.8 PNP/PCI Configuration
This setup is used to configure Plug “n” Play IRQ assignments and route PCI interrupts
to designated ISA interrupts.
Use the PNP/PCI Configuration Setup option as follows:
1. Choose “PNP/PCI Configuration Setup” from the main menu, the following screen
appears.
Содержание MB-73030
Страница 6: ...6 1 5 Board Dimension Board Dimension mm Component Side...
Страница 7: ...7 Board Dimension mm Solder Side...
Страница 36: ...36 Save Exit Setup...
Страница 37: ...37 Exit Without Saving...