Shower paneel
SanTec PROOF P4
13
EN
PROOF P4
Bezeichnung
Duschkopf SanTec PROOF
Elektronikmodul
Magnetventil
Magnetventil-Adapter
6 V Lithium Batterie
Batteriemodul 6 V
Netzteil (1-fach)
Netzteil (5-fach)
Thermostat
Congratulations on purchasing the SanTec PROOF P4.
In order to ensure that you will be able to enjoy this high-quality
product for many years, please take note of the following cleaning
and maintenance recommendations:
Use mild cleaning agents containing soap
Do not use abrasive, scrubbing, sealing or acidic
cleaning agents or disinfectants
Clean the fitting with a soft sponge or cloth only
Do not use steam cleaners
This manual is valid for the following products:
SanTec PROOF P4 - 6 V
Art.No. 120 998
SanTec PROOF P4 - 12 V
Art.No. 121 018
Delivery scope:
On wall aluminium housing with integrated electronics, thermostat
with hot-water barrier, vandalproof shower head, 1 magnetic valve,
connection module for external supply or 6 V battery module incl.
battery and mounting material.
Important installation notes:
Mounting and installation may only be performed by a qualified
service provider in accordance with DIN 1988, ÖVE/ÖNORM E8001
and VDE 0100 Part 701. When planning and installing sanitary
facilities, all relevant local, national and inter-national standards
and provisions must be observed! Provide for 230 V / 12 V power
unit outside of the protected zone.
According to the Austrian ÖNORM B 5019, thermal disinfection re-
quires a minimum temperature of 60 °C for at least 10 min at the
relevant system locations. The operator must ensure that all parts
of the installation (e.g., piping) can withstand the temperatures
applied during thermal disinfection.
General notes
The “General installation
terms and conditions”
provided at
www.wimtec.com apply.
!
