6
SanTec OCEAN W7
flush mount set
EN
OCEAN W7 flush-mount set
Specifications
Operating voltage: via power supply 230 V 50 Hz / 12 V=
Art.No. 117 899 - power supply for one
control unit
Art.No. 113 792 - power supply for up to
5 control units
Power consumption: max. 3.5 W
Flow rate:
0,05 - 0,6 MPa (0,5 - 6 bar)
Flow rate:
6 l/min (independent of pressure)
Static pressure:
max. 0,8 MPa (8 bar)
Water temperature: max. 70 °C (max. 80 °C for max. 10 min)
Water inlet:
R 1/2“ IG
Noise class:
I
Flush-mount set:
W/H/D: 177 x 85 x 75 - 100 mm
This manual is valid for the following products:
Art.Nr. 118 711
SanTec W7 flush-mount set
Delivery scope:
Wall-recess unit with 2 shut-off valves and integrated dirt filters,
mixer, 1 magnetic valve and cover plate.
Important installation notes:
Provide for a flush-mount box for an optional power supply outside
of the protected zone. Mounting and installation may only be per-
formed by a qualified service provider in accordance with DIN 1988,
ÖVE/ÖNORM E8001 and VDE 0100 Part 701. When planning and
installing sanitary facilities, all relevant local, national and inter-
national standards and provisions must be observed!
General notes
The “General installation
terms and conditions”
provided at
www.wimtec.com apply.
!
