10 Urinal control
SanTec OCEAN U8
EN
OCEAN U8
Congratulations on purchasing your urinal control
SanTec OCEAN.
In order that you will be satisfied with this high-valued ar-
mature for long years, we recommend considering following
points for cleaning and maintenance:
Only use gentle cleaning supplies based on soap.
Don´t use acidic cleaning supplies or disinfectant, which
scrape or rub.
Only clean by using soft sponge or cloth.
Don´t use steam stream equipment.
These instructions are valid for the following products:
SanTec OCEAN U8 230 V
Glass white
Art.No. 109 863
Glass white/chromium
Art.No 109 856
Black
Art.No. 109 870
Black/chromium
Art.No. 115 584
Scope of supply:
Safety glass-front plate with frame, mounting frame with integ-
rated electronics, power supply, magnetic valve and
fixing material.
Important installation hints:
Mounting and installation must be performed by licensed
craftsmen to DIN 1988, OVE/ONOERM E8001 as well as VDE
0100 part 701.
Make the feeder by a 2-pin main switch with minimum 3 mm
connection opening and protect with maximum 6 A!
When planning and installing sanitary systems, the relevant
local, national and international standards and regulations must
be complied with!
The “general installation conditions” at www.wimtec.com are
valid.
General notes
