Bath fitting
WimTec OCEAN B7
25
EN
OCEAN B7
Assembly
7.
Configure the desired functions at the electronics module
(see p. 23).
8.
Connect the power cables to the electronics module
(
mind correct po/-
) and connect the grounding wire
(yellow) to the water path.
9.
Connect the magnetic valves for the tub and shower to the
electronics module. Fix ground wire (yellow) on brass parts.
10
. Connect the cable between the glass front plate and the elec-
tronics module. Then switch on the power (causing the safety
locking mechanism of the magnetic valves to activate).
11.
Open both integrated stop valves using a screwdriver.
12.
Insert the electronics module into the designated slot.
ATTENTION!
Perform the following steps
in the order indicated!
!
11
9
12
7
10
8
+ -
