WIMO 6CP10
Measuring and monitoring unit
Operation and configuration
Wimotec Ltd
10
Wimotec 24h support phone +358 (0)20 753 3264
WM6CP10.EN001
3.2.
Operating levels
The unit has two operating levels:
User level
and
Configuration
level
. The purpose of the configuration level is to prevent
accidental change of unit configurations, parameters or
settings.
USER level
Use:
Possible to read e.g. parameter values,
measurements and events
Opening:
Level permanently open
Closing:
Closing not possible
CONFIGURATION level
Use:
The configuration level is needed during the
commissioning of the unit. E.g. the scaling of
the voltage and current transformers can be
set.
Opening:
Default password 0002
Setting state: Push ENTER
Closing:
The level is automatically closed after 10
minutes idle time. Giving the password 9999
can also close the level.
3.2.1.
Opening configuration level
1.
Push the LEFT key and the RIGHT key on the front panel
simultaneously.
Figure 3.2.1-1. Opening the operating level
2.
Enter the password needed for the desired level: the
password can contain four digits. The digits are supplied
one by one by first moving to the position of the digit using
the RIGHT key and then setting the desired digit value
using the UP key.
3.
Push the ENTER key.
