DC3V 1.5VX2
30
29
32
31
33
24
SAFETY
GAUGE
GAS
25
H VIEW
9.
STEP 12
PLACEMENT OF OIL CUP
1. Working from the back, slide Oil Cup (24)
into the brackets under the Fat Tray,
as shown in diagram.
STEP 14
ATTACH FLEXIBLE GAS HOSE FIXED AND CONNECT GAS CYLINDER
1. Prior to fitting gas cylinder ensure the cart, shelves, body and lid are secure.
2. All fixings are tight.
3. Partially loosen bolts in Flexible Gas Hose Fixed (25)
and position over main barbeque gas hose connection
as shown in diagram.
4. Place bolt heads through mounting holes in
Cart Right Panel (5) and push down into correct
position as shown in H View.
Tighten bolts but do not over-tighten.
5. Place gas cylinder on Gas Tank Tray (7);
ensure the gas supply is off.
6. Connect the regulator to the gas cylinder;
THIS IS A LEFT HAND THREAD MEANING IT
TIGHTENS IN AN ANTI-CLOCKWISE DIRECTION.
7. Care must be taken not to cross-thread these
connections and do not over-tighten the nut.
STEP 13
MOUNT ROTISSERIE
1. Align Motor Sup (30) to pre-drilled left-hand side of Body & Lid Assembly (12) holes as shown in diagram.
2. Thread 2xBolt (A) through Motor Sup (30) and Body & Lid Assembly then through Flat Washers (C)
and Spring Washer (B) into Nuts (M). Tighten.
3. Mount Motor (29) onto Motor Support (30).
4. Connect Fork A (31) and Fork B (32) as shown in diagram.
5. Hang Clump weight (33) from Fork B (32).
6. Insert assembled fork to Motor (29) resting right-hand side on Body & Lid Assembly (12) right side panel.
A M6X12...2
PCS
B
M6 SPRING WASHER...2 PCS
C M6 FLAT WASHER...2 PCS
M M6 NUT...2 PCS