3-13
SYSTEM
CONFIGURATION
The system configuration function provides menus that let you set or
select instrument configuration items; for example, display intensity,
polarity of blanking and video marker outputs, RF on or off during re-
trace or between steps, GPIB address and line terminator, and incre-
ment sizes for frequency, power level, and time parameters. Use the
System Configuration menu map (Chapter 4, Figure 4-13) to follow
the menu sequences.
To go to the System Configuration menu, first press
SYSTEM
. At the
System Menu display, press
Config
. The System Configuration Menu
(below) is displayed.
This menu lets you go to the Front Panel, Rear Panel, RF, GPIB, and
Increment Configuration menus.
LOCAL (FRONT
SYSTEM
PANEL) OPERATION
CONFIGURATION
3-68
681XXB OM
