Wiltron 680 B Series, Руководство по эксплуатации, Страница: 95 / 211

Additional Configure GPIB Menu
When you press
More the additional Configure
GPIB menu (below) is displayed.
This menu lets you perform the following:
Select the model and GPIB address for the
power meter that is used to create a user level
flatness correction power-offset table. (Refer to
page 3-53 for a description of this function.)
Select the external interface language for re-
mote operation of 680XXBs with Option 19 in-
stalled. (Refer to page 2-9 for more informa-
tion.)
Press
Pwr Mtr Address
to change the address of
the power meter on the GPIB (the power meter’s de-
fault GPIB address is 13). Enter a new address, be-
tween 1 and 30, using the cursor control key or the
data entry keypad and the terminator key
Hz
ns
ADRS
The new GPIB address will appear on the display.
Press Pwr Mtr Select to select the power meter
model being used. (Supported power meters are the
Anritsu ML4803A and Hewlett-Packard 437B,
438A, and 70100A.)
Press Native/SCPI to select the external interface
language to be used for remote operation of the
680XXB. (Language selection is only available on in-
struments that have Option 19 installed.)
Press Previous Menu to return to the main Config-
ure GPIB menu display.
LOCAL (FRONT SYSTEM
PANEL) OPERATION CONFIGURATION
3-66 680XXB OM