#28805 Model 1745 Tradesman Vise
Mounting Template
Drill four (4) 9/16
”
diameter holes. Mount vise with four (4) 1/2
”
diameter cap bolts, 2 inches longer than benchtop thickness.
Use minimum Grade 5 bolts. Secure with flat washers and nuts.
Align dashed line with edge of workbench. Tape paper in place
and transfer bolt hole centers to benchtop with a center punch.
Make sure underside of bolt hole locations is clear of legs,
brackets, drawers, etc.
1/8 INCH
FOLD LINE
⚠
WARNING: Mounting Template for Reference Only
For exact mounting dimensions, please refer to the Bullet
Bench Vise Mounting Dimensions document included with
the product and found online at wiltontools.com.
